Dentsply Aquasil Soft Putty Regular Set is a very high viscosity impression material with optimum flexibility for easy removal from undercuts.
 
Description
Dentsply Aquasil is an elastomeric impression material with very high viscosity
The material has optimum amount of flexibility for easy removal of the impression from undercuts
This very high viscosity putty impression material is based on quadrafunctional hydrophilic siloxanes
Aquasil is suitable for all precision impression techniques. It displays excellent hydrophilic properties that improve the materials wettability.
The dimensional accuracy, high tear strength and resistance to permanent deformation makes Aquasil the perfect material to make precision dental impressions
It can be used as a tray material for the double mix technique or as a primary impression material while making impressions using the two-step putty/wash technique
This impression material complies with the requirements of ISO 4823 for dental elastomeric impression materials
Dentsply Aquasil Soft Putty must be stored at temperatures between 10 - 24 °C
 
COMPOSITION :-
Base :-
Silica Crystalline
Vinyldimethicone
Zeolith Highly dispersed silica (AEROSIL®1)
Paraffine oil
Polydimethyl-hydrogen siloxane
Green pigment (Cosmetic Green, C.I. 77288)
Yellow pigment (Arc Yellow A16 N)
Catalyst : –
Silica Crystalline
Vinyldimethicone
Zeolith
Highly dispersed silica (AEROSIL®1)
Paraffine oil
Platinum complex + Pt-metal
Calcium carbonate 1,3-Divinyltetramethyldisiloxane
Titanium dioxide
INDICATION :-
It is for use as a tray material for the double mix technique or as primary impression material for a two-step putty/wash technique.
ADVANTAGE :-
High tear strength.
More stable dimensionally in storage ( No synersis, imbibation or evaporation)
FEATURES:-
Very high viscosity elastomer
Excellent hydrophilicity
Outstanding dimensional accuracy
High tear strength
Resistance to permanent deformation
High wettability
Precision dental impressions
Key Specifications :-
HANDLING CHARACTERISTICS
Mixing time : 0:30
Application time : 1:30
Minimum time in mouth (ISO) : 3:00
Setting time : 4:30
PROPERTIES OF AQUASIL PUTTY :-
Material Properties: Aquasil Soft Putty
Delivery System: Tubs
Mixing technique: Knead with fingertips until a uniform color is achieved.
Mixing Ratio: 1:1
Linear dimensional change: 0.05%
Maximum compression strain: 3.5%
Permanent deformation: 0.5%
Recovery from deformation: 99.5%
Reproduction of detail: <50µm
 
Direction to Use :-
STEP 1- Preparation of Impression Area 
Clean the Impression area with air/water spray and remove excess water.
STEP 2- Mixing and filling the tray
Take equal amounts of catalyst and base using the color-coded measuring spoons and knead with fingertips until the colour of the mix is uniform. Immediately fill prepared tray.
 
Packaging :-
1 x 450 ml Catalyst
1 x 450 ml Base.
2 Spoons