Zinc polycarboxylate cement for permanent luting and lining
 Better biocompatibility
 Non irritant
 Liner for all types of filling materials
 
Features.
Better biocompatibility than phosphate cements
Non irritant for sensitive teeth
Less irritant to the pulp than zinc phosphate cement
Cement according to DIN EN ISO 9917-1
 
Benifits.
 
Easy and safe application
Unmatched price-performance ratio for luting materials
 
Indication
Zinc polycarboxylate cement for permanent luting of crowns and bridges, inlays and onlays on natural core and for luting supraconstruction on implants
For crowns and bridges made of
Zirconia
Aluminium oxide
Lithiumdisilicate
Silicate ceramic
For all classical metal and metal-ceramic materials
Liner for all types of filling materials
 
Directions
 
Areas of Application: 
Fixation of crowns and inlays, cavity linings 

Dispensing Instructions: 
Fixation consistency: 2.9 g powder : 1.0 g liquid 
Cavity lining consistency: 3.6 g powder : 1.0 g liquid 
Dispensing and testing climate for testing in accordance with DIN EN ISO 9917: 
 
Processing Recommendations: 
A clean, dry glass plate at approx. 20 degree C (68 degree F) and a non-discolouring spatula are recommended for mixing. 

Mixing: 
Divide the measured quantity of powder into 3 portions (1/2 1/4 1/4). Beginning with the largest quantity, stroke the powder into the measured liquid within 60 seconds. The mixture should appear thicker as usual for zinc phosphate cement, yet it is just as easy to work. The fixation consistency has been reached when the peak formed on lifting the spatula slowly falls back into the paste. The filling consistency has been reached when on lifting the spatula, the peak drawn out forms a small hook and does not sink back into the paste. Discard remaining powder or impure liquids. 

Mixing Time: 
60 seconds 

Processing Time from start of mixing (at 23 degree C, 72 degree F): 
For fixation: 2 minutes 
For cavity linings: 1 minute 30 seconds 
Setting Time from end of mixing: 2:30 – 6:00 minutes 

Special Informations: 
- The mixed cement should never be applied directly onto dentine near to pulp or onto exposed pulp 
- Apply the thinnest possible layer for fixations 
- The cement must be applied to the dry tooth surface and must set without contact to moisture 
- Remove excess material from neighbouring teeth, facets etc. immediately 
- Do not expose liquid to sunlight and frost 
- Close containers immediately after removing material 
- Clean instruments and glass plate with water before the cement sets Zinc polycarboxylate cement can be dissolved using a cement-solvent after setting
 
Packing Contents
15ml Liquid, 35g Powder